The Axia Alloys billet license plate frame can be roll cage or bumper mounted, either vertically or horizontally. Complete with a wired 12v LED light (Frame must be lighted by law in most states to be street legal). Fits all standard motorcycle size plates. Note: This is a kit which includes the Axia tube clamp and…
The Axia Alloys adjustable angle flag mount can be used anywhere. Mount on a horizontal bar, Vertical bar, or on a bar of ANY ANGLE. This mount offers a full 360 degrees of adjustablity and locks into position. This flag mount has an industry standard ½” hole on the top and is machined with two…
Keep your helmet air pumper hose clean and where you need it with these plug mounts. Multiple O-rings on the mounting surface keeps the hose from vibrating off when not connected to your helmet and your air hose dust free for when you are using your pumper system. Fits RacerX, Parker Pumper, PCI, and Rugged…
The Axia Alloys A pillar light mounts allow you to mount a wide variety of off road lights directly to the angled front side bars on your vehicles roll cage. Brackets are angled to give you a nice flat mounting point to be able to direct your lights wherever you like them. They come with…
This registration sticker mounting plate (California green sticker plate ) allows you to mount your registration sticker on either a horizontal or vertical mounting bar from .875” to 2.375” diameter. This is an original size plate and the mounting surface measures 4.0" x 2.55". Available in Black and Satin Aluminum. Note: This is a kit…
The Axia Alloys 2 way radio communications antenna mount is a perfect solution for those with stock cages, or aftermarket cages without communications tabs. This billet antenna mount will attach to your vehicle tubing either below or above your horizontal mounting bar. Mounts all popular brands of radio antennas. Note: This is a kit which includes…
Just released another great product from Safeglo whips! The all new HD stainless steel powered quick release for led whips. This is a beautiful custom piece. We recommend this Quick release with our all new HD super led whip. It has a U.S. standard 1/2 X 20 thread pattern.
These smaller mounts are the best all around holder for your phones and/or GPS. Each mount comes with 2 straps so that you can custom fit your device. Cage/Tube mount your iPhone, iPod Touch, Android Device or Handheld GPS with these unique mounts . Each mount features an adjustable silicone strap and embossed rubber backing plate…
The Axia Alloys billet headset / goggle hangers can mount to any size tube using our patent pending modular rollcage clamping system. These clamps are low profile enough to fit under roofs and other accessories mounted to the roll cage. They are designed to have close tolerances between the top of the hanger and the…
Axia Alloys Vertical Bar light mount. Attaches to any vertical bar to mount Rigid Industries Dually or Black Rhino Performance lights and other small led lights. Has a .400" / 10mm hole drilled in it. Note: This is a kit which includes the Axia tube clamp and the mount as shown in the picture. If you…
Axia Alloys Vertical Bar light mount. Attaches to any vertical bar to mount Rigid Industries Dually or Black Rhino Performance lights and other small led lights. Has a .400" / 10mm hole drilled in it. Note: This is a kit which includes the Axia tube clamp and the mount as shown in the picture. If you…
The Axia Alloys mount is for Rigid Industries end mount led light bars with 6mm or 1/4" fastener diameter (Other size slots available). Requires 2 per light bar. 6mm / 1/4" slot on L bracket can position you end mount light bar Between 1.7" and 2.8" from the leading edge of the mounting bar to…
The Axia Alloys small light mount allows you to clamp a wide variety of off road lights directly to your front bumper or cage. It can be mounted with the mounting hole in front of the tubing if there are clearance issues or behind the tubing for a very clean install. No need to purchase…
This vertical bar whip/flag mount from Axia Alloys is the lightest, lowest profile whip mount on the market. This whip mount has an industry standard 1/2" hole machined into it for use with most whips and flags. Available in Black or Satin Aluminum. Note: This is a kit which includes the Axia tube clamp (strap) and…
Surface mount your iPhone, iPod Touch, Android device or Handheld GPS with these unique mounts. Each mount features an adjustable silicone strap and embossed rubber backing plate so that your accessory stays put in the most demanding off road environment. The backing plate is also recessed in the center so that GPS systems with curved…
These low profile strap clamps are the core of the Axia Alloys Modular Clamping System. These powerful Billet clamps come in 3 different roll cage sizes maintaining a low profile around the tubing for clearance under windshields roofs and other accessories.
