-
Axia Alloys Tube Mounted LED License Plate Frame
From: $59.95The Axia Alloys billet license plate frame can be roll cage or bumper mounted, either vertically or horizontally. Complete with a wired 12v LED light (Frame must be lighted by law in most states to be street legal). Fits all standard motorcycle size plates. Note: This is a kit which includes the Axia tube clamp and…
-
Axia Alloys Adjustable Angle Flag / Whip Mount
From: $29.95The Axia Alloys adjustable angle flag mount can be used anywhere. Mount on a horizontal bar, Vertical bar, or on a bar of ANY ANGLE. This mount offers a full 360 degrees of adjustablity and locks into position. This flag mount has an industry standard ½” hole on the top and is machined with two…
-
Axia Alloys Air Pumper Hose Plug Mount
From: $24.95Keep your helmet air pumper hose clean and where you need it with these plug mounts. Multiple O-rings on the mounting surface keeps the hose from vibrating off when not connected to your helmet and your air hose dust free for when you are using your pumper system. Fits RacerX, Parker Pumper, PCI, and Rugged…
-
Axia Alloys A-Pillar Light Mount
From: $24.95The Axia Alloys A pillar light mounts allow you to mount a wide variety of off road lights directly to the angled front side bars on your vehicles roll cage. Brackets are angled to give you a nice flat mounting point to be able to direct your lights wherever you like them. They come with…
-
Axia Alloys Registration Sticker Mount
From: $24.95This registration sticker mounting plate (California green sticker plate ) allows you to mount your registration sticker on either a horizontal or vertical mounting bar from .875” to 2.375” diameter. This is an original size plate and the mounting surface measures 4.0" x 2.55". Available in Black and Satin Aluminum. Note: This is a kit…
-
Axia Alloys XP1000 Angled Whip/Flag Mount
From: $24.95The Axia Alloys angled flag mounts attach to the rear angled portion of the OEM Polaris cage on the 2 and 4 seat XP 1000's. They have a 1/2" hole drilled in them to accept most whips. 1.75" Clamp size required on the Xp1000's. Note: This is a kit which includes the Axia tube clamp…
-
Axia Alloys Antenna/Communications Cage Mount Kit
From: $24.95The Axia Alloys 2 way radio communications antenna mount is a perfect solution for those with stock cages, or aftermarket cages without communications tabs. This billet antenna mount will attach to your vehicle tubing either below or above your horizontal mounting bar. Mounts all popular brands of radio antennas. Note: This is a kit which includes…
-
Axia Alloys Small iPod/GPS Cage Mount
From: $24.95These smaller mounts are the best all around holder for your phones and/or GPS. Each mount comes with 2 straps so that you can custom fit your device. Cage/Tube mount your iPhone, iPod Touch, Android Device or Handheld GPS with these unique mounts . Each mount features an adjustable silicone strap and embossed rubber backing plate…
-
Axia Alloys Headset/Goggle Holder
From: $24.95The Axia Alloys billet headset / goggle hangers can mount to any size tube using our patent pending modular rollcage clamping system. These clamps are low profile enough to fit under roofs and other accessories mounted to the roll cage. They are designed to have close tolerances between the top of the hanger and the…
-
Axia Alloys Vertical Bar Light Mount (Light Pods)
From: $19.95Axia Alloys Vertical Bar light mount. Attaches to any vertical bar to mount Rigid Industries Dually or Black Rhino Performance lights and other small led lights. Has a .400" / 10mm hole drilled in it. Note: This is a kit which includes the Axia tube clamp and the mount as shown in the picture. If you…
-
Axia Alloys Rigid LED Light Bar Mount
From: $19.95The Axia Alloys mount is for Rigid Industries end mount led light bars with 6mm or 1/4" fastener diameter (Other size slots available). Requires 2 per light bar. 6mm / 1/4" slot on L bracket can position you end mount light bar Between 1.7" and 2.8" from the leading edge of the mounting bar to…
-
Axia Alloys Small Light Mount
From: $19.95The Axia Alloys small light mount allows you to clamp a wide variety of off road lights directly to your front bumper or cage. It can be mounted with the mounting hole in front of the tubing if there are clearance issues or behind the tubing for a very clean install. No need to purchase…
-
Axia Alloys Vertical Bar Whip/Flag Mount
From: $19.95This vertical bar whip/flag mount from Axia Alloys is the lightest, lowest profile whip mount on the market. This whip mount has an industry standard 1/2" hole machined into it for use with most whips and flags. Available in Black or Satin Aluminum. Note: This is a kit which includes the Axia tube clamp (strap) and…
Product Categories
- Best Sellers
- Clamps/Mounts
- Communications
- Dash Plates
- Drivetrain
- Electrical
- Exhaust Systems
- Fuel/Filtration
- Gift Certificates
- Helmet Blowers
- Ignition
- Lighting
- Maintenance
- Mirrors
- Protection
- Racing Products
- Safety
- Seats and Belts
- Steering
- Storage and Bags
- Tires and Wheels
- Tools and Fab Supplies
- Windshields
- UTV Graphics